76 MARCH 2019 scca.com
SportsCar welcomes submissions of relevant motorsports products. Please send a description of the product, including price, and a color image to SportsCar Top Gear,
17030 Red Hill Avenue, Irvine, CA 92614, or e-mail firstname.lastname@example.org. Products appearing in SportsCar are not necessarily endorsed by SportsCar or the SCCA.
HOLLEY BOOST CONTROL KIT
According to Holley, its EFI boost control solenoid flows nearly
40-percent more than comparable designs and up to 90-percent more
than conventional three-port boost control solenoids. The Holley
EFI High Flow Dual Port Boost Control Kit contains a set of preinstalled
high flow solenoids, which feature a dual O-ring sealing design,
preventing any boost leaks out of the manifold. holley.com
HEATSHIELD PRODUC TS
LAVA STAR TER SHIELD
Heatshield Products Lava
Starter Shield is engineered with
specially formulated volcanic
rock-based fibers and is rated for
1,200-degree F continuous heat
and intermittent temperatures
as high as 2,000 degrees F.
One of the key technical
advantages of Lava Starter
Shield is that it performs well
even with an air gap from the
heat source of only a half inch.
SPECIALT Y PRODUC TS CO.
HONDA ALIGNMENT PARTS
Perfect for both track use or to
get camber back into spec after
lowering, SPC’s adjustable rear
camber arm and adjustable front
lower ball joint is for the new 10th
gen Civic. The rear arm features
SPC’s xAxis sealed flex joint to
reduce compliance and adjusts
camber up to three degrees
while the maintenance-free front
lower ball joint adjusts camber
plus or minus one degree.
S2000 BRAKE KIT
Wilwood’s Superlite 6R/ST
road racing brake kit for the
2000-’09 Honda S2000
is engineered to provide
the ultimate in durability,
heat management, and
championship performance in
extreme on-track competition.
All components are precision
machined for direct mounting
to the OE spindles, with
full compatibility to the OE
hydraulics and ABS system.
Forgeline Motorsports introduces the latest addition to their competition
wheel series: the ZO1R. Featuring a split five parallel spoke design, the
fully forged, one-piece monoblock uses an open lug center to reduce
mass and provide easier access to lug nuts. Engineered for sports car
racing, the ZO1R carries a 2,100lb load rating with exceptional deflection
stiffness to withstand the most rigorous of top-level endurance racing.
Cat-back exhaust system for the
2009-2019 RAM truck with 5.7L
Hemi is manufactured using
409 stainless steel for years of
trouble-free service. Features
include 3.00-inch inlet pipe
leading into a single inlet/dual
outlet FlowFX straight-through
muffler for great sound and
maximum performance. The
dual 2.50-inch mandrel bent
tailpipes exit via the factory
cutouts with large 4.50-inch
diameter black ceramic-coated
304 stainless steel tips.